Wheels

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings...And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

- Converts Schrader rims to Presta - Rubber - Sold individually

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Heavy duty and extra wide PVC rim strips for maximum tube protection.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Parts for repair and maintenance of DT Swiss hubs.

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

Replacement Axle nuts for three speed Sturmey Archer hubs.

- Shell: 8mm flanged axle nut - Flanged

Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

- Replacement part for Surly hubs.

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

- Eady to install - Spoke mounted - 2 per set

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

Stainless spoke nipple flat washers from Whisky. - .3mm Thickness

- Replacement adjustable nut for three-speed internal hubs.

- Steel end nut for QR skewers

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #16 Clutch Ring

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #20 Cone Drive

Seal kit to keep water and dirt out of your Race Face Vault hubs.

• Rim strips for 20-inch fat bike rims • 80mm wide

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Salsa springs for Flip-Off skewers

A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.

Rubber rim strips for 24-inch diameter fatbike rims. - Sold individually

Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.

- Strong nylon reinforced PVC for a secure fit - Handles high-pressures; does not rot - 0.5mm thick