Topeak's RideCase and mount lets you use your iPhone 6 or 6 Plus as a cycling computer, as a GPS navigating device, to listen to music, and so much more while you're cruising the open road. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. An integrated flipstand allows comfortable viewing in landscape or portrait orientation when you're off the bike. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds.
The Stages Power meter is built on to a non-drive FC-6800 crank arm specifically to pair with Shimano's Ultegra 6800 crank. The new Stages Power meter is slimmer, and up to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Ultegra 6800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
The Serfas PH-1 Bicycle Phone Holder fits mobile devices with screens 4.7 to 5.5-inches in size. It's made of soft stretchy silicone that won't scratch your device. The injection molded Nylon mount attaches easily to any size bicycle handlebars with a secure strap and single-nut adjustment system. The mount can rotate 360 degrees and locks at every 90-degree rotation for vertical or horizontal screen viewing. - Accommodates Single Mobile Device With 4.7 to 5.5 inch Screen (e.g. iPhone 8, iPhone 8 Plus, and other comparably sized devices) - Easy-To-Use Handlebar Mounting System - Silicone Holder Can Be Removed From Mount With Quick Release Tab - Size: 136mm x 46mm x 19.5mm - Materials: Silicone (Holder) / Nylon (Mount) - Weight: 51.8g
- SUPER GRIP: Specially designed vent clip made from Super Grip TPE won’t slip like other cheap silicone vent mounts. - MOUNT IN SECONDS: Slide mount over almost any vent. Use any Rokform magnetic case or use the supplied inserts to mount almost any phone or case. - ANTI-SLIP MAGNETIC FACE: Specially designed TPE anti-slip grip allows solid non-slip mounting in portrait and landscape. No more sliding and constant adjustment. - MACHINED ALUMINUM: Specially designed bezel holds front grip securely in place and won’t peel off like other lesser quality glued together mounts. - MAGNETIC TECHNOLOGY: Specially designed Neodymium magnet will not negatively impact your GPS, credit cards, Wi-Fi, Apple Pay, Bluetooth, camera or data transfer.
Profile Design's UCM Aerobridge positions your computer between your aero extensions to give you an additional accessory mount. It features adjustable width so you can be sure of a great fit.
- Allows rider to update firmware in G3 PowerCap. - Allows rider to change the hub’s CR2032 battery. - Used for the removal of the G3 PowerCap. - Removes the G3 PowerTap cap to update the firmware or change the hub’s CR2032 battery.
Tiny yet powerful magnets, compatible with any bike computer, designed to efficiently fit Mavic Tracomp carbon spokes.
PWR Commuter is a 450 lumen LED bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; is USB rechargeable, and has 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. Elliptical beam: Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @250 lumens means you can top up charge your iPhone by 10%. Charge time 3.5 hours. - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key - Battery indicator - USB rechargeable - Water resistant - Light output: 450 Lumens - Power bank: 850 mAh - Dimensions: 98 x 30mm - Weight: 85g
PWR Road is a modular bike light. But it's not JUST another bicycle light. Not only is it a high power headlight, but simply take the product apart and you have much more. A lighthead for other PWR bike and camping lights, plus a PWR Bank to charge devices that is also the battery for all products in the PWR range. The PWR Road outputs a max 600 lumens, can run for up to 195 hours on Eco Flash mode, uses an elliptical beam for broader road coverage, can be mounted both on top or under the handlebar (mount under your Garmin), or your helmet, incorporates twist mode operation (turn the light on and off twisting the lighthead - no buttons) and gives you the option to program your brightness and runtime through our ModeMaker app. Functionality: Twisthead operation to turn light on / off and to scroll through light modes (no buttons) Charge your devices: Remove the light head and use the PWR bank to charge your phone, GoPro, cycle computer or other devices. 1 hour riding @600 lumens means you can top up charge your iPhone by 50%. Charge time 3.5 hours. - Light output: 600 Lumens - Power bank: 3350 mAh - Dimensions: 104 x 30mm - Weight: 125g - What's in the pack: Light, Power Bank, Side Mount, Gimbal Shim, USB Cable
Perhaps the best time to charge your GoPro camera is in transit, and with GoPro's Auto Charger, you can make the most of the commute to your adventure. The dual USB port quickly charges two cameras at once, and you can even record while you charge. The kit includes 2 USB cables so you can charge multiple cameras, and it even works with most devices that charge via USB.
GoPro's BacPac Compatible Housing protects your Hero 3+ or Hero 3 camera from the elements and from impacts. This housing replaces the original unit included with your GoPro camera, and it is waterproof up to 197 feet (60 meters).
When the going gets gnarly, it's a good idea to strap on GoPro's Camera Tethers to further secure your camera. Just stick the adhesive mount to your helmet or other flat object, then wrap the tether around the housing's backdoor to keep your GoPro in place no matter how intense the adventure gets.
With GoPro's Curved and Flat Adhesive Mounts, you can get creative with your mounting options for awesome camera shots on your next adventure! Waterproof and industrial strength, these mounts will stick to flat and curved surfaces, and when you're done it's easy to remove them using a hairdryer.
Mount your GoPro to your dog to capture the world from his point of view. This harness features two mounting locations for a variety of perspectives: the chest, for bone-chewing, digging and front-paw action, and the back, for over-the-head shots of running, jumping, fetch and more. Made of washable, water-friendly material, your dog can swim, play and get dirty without a worry. Soft, padded construction keeps your pet comfortable. Fully adjustable to fit small, medium and large breed dogs from 15 to 120 lbs (7 to 54 kg).
GoPro's Hero 3 3.5 Mic Adapter connects any external 3.5mm microphone to your Hero 3 camera. It is compatible with Hero 3 cameras only.
Use GoPro's Hero 3 Anti-Fog Inserts to combat cold and humid environments that can fog up your footage. These reusable inserts last approximately four uses and can keep your GoPro recordings crystal-clear even in the most demanding conditions.
GoPro's Hero4 Rechargeable Battery replaces the unit that comes standard with Hero4 cameras. Use this as a back-up or a replacement.
GoPro's ens Replacement Kit replaces the original equipment that comes standard on your camera. The kit includes a screwdriver for quick, convenient installation.
GoPro's Micro HDMI Cable allows you to showcase footage from your adventure on an HDTV for big, bold playback. This 6 foot cable gives you plenty of length to connect your camera to your television.
GoPro's Hero 3 Protective Lens and Covers offer added protection for your Hero 3 or Hero 3+ camera when you're transporting the unit in a backpack or pocket.
Mount your GoPro to guns, fishing rods, and bows. This versatile mount is compatible with most shotguns, rifles, revolvers, airsoft, paintball, and pellet guns, and fits bow components and fishing rod grips with a diameter of 0.4” to 0.9” (10mm to 23mm). You can mount one or two cameras front-facing and/or rear-facing to capture immersive footage from a variety of angles and perspectives. A non-reflective, matte black finish ensures low visibility. Fits 0.4" to 0.9" (10mm to 23mm) diameter gun barrels, fishing rod grips, and bow components.
GoPro's Suction Cup adds versatility to your camera mounting quiver with an industrial strength cup that stays put even at speeds of 150 miles per hour or more. Stick this mount to a clean, flat surface and you've got exciting angles on all the action!
Capture all your aqua action with GoPro's Surfboard Mounts. When maximum holding strength is required, the Surfboard Mounts shine thanks to industrial adhesive and tethers. And, you can get extra creative thanks to the included FCS compatible male plug.
Get a solid grip on your GoPro and keep it afloat with The Handler. Whether capturing selfies, POV, or follow-cam footage, this buoyant hand grip delivers increased stability and control—making it easy to aim the camera and frame your shots with confidence. Perfect for surfing, kayaking, wakeboarding, and more, it floats any GoPro camera plus BacPac accessory so you can shoot in and around the water without a worry. Includes an adjustable wrist strap and The Tool—a GoPro thumb screw wrench that doubles as a bottle opener. Waterproof to 33' (10m).
Strap your GoPro to your hand, wrist, arm or leg to capture hands-free ultra-immersive POV footage, one-of-a-kind selfies, and more. Includes an extended strap that fits around your arm, leg, or larger objects. Features 360° rotation and tilt that let you adjust your capture angle on the fly. Ideal for countless activities and fully adjustable to fit a wide range of adult sizes, The Strap is one of GoPro's most versatile mounts. - Includes specially designed hand and wrist straps - The extended strap fits around your arm, leg and other objects - Can be used in and out of the water - Rotate your camera 360° or flip it up or down without un-mounting - Fully adjustable to fit a wide range of adult sizes
The Tool makes it easy to tighten your GoPro thumb screws to prevent the camera from shifting during high-speed, high-vibration activities. Whether you’re headed surfing, skydiving or off-road racing, The Tool delivers the extra torque you need to get your thumb screws tighter than you can by hand. It’s perfect when mounting the camera using multiple extension arms, or adjusting thumb screws in cold conditions with numb fingers. Added bonus: The Tool doubles as a bottle opener, so you can use it to crack a cold one back in the parking lot.
GoPro's Wi-Fi Remote Attachment Key and Rings allow you to attach the Wi-Fi Remote (sold separately) to your car keys, lanyards, straps, zippers, and more. This kit includes 5 attachment key rings.
GoPro's Wrist Housing puts the action right at your fingertips...or slightly above them. It fits over ski gloves and jackets, and it's waterproof—should your adventures take you away from land. The housing also pivots so you get the perfect angle every time.
-Giant's ANT+/Bluetooth compatible heart rate sensor
Giant's Axact 9W is a great way to get the most out of your rides. This wireless computer keeps you bike clutter-free and tracks nine essential functions, including distance and speed, with its large, easy-to-read display. The Axact also features a low battery indicator so you know when its time to open the easy coin-release cap and replace the battery.
Page 1 of 10 Next page