$63.00 - $63.99
Lighten your ride and add some class with Zipp's Carbon Fiber Bottle Cage. It's super strong, securely holds all cycling bottles, and weighs only 21 grams.
XLAB's Sonic Wing Dual Bottle Rear Carrier fits perfectly in seatposts with 2 6mm holes and lets you carry your gear behind you tucked out of the wind. This versatile carrier gives you options galore so you can easily attach what you need for any length ride. You also have 30 different mounting options and can keep it upright for low drag or invert it for easy access. And, since it attaches to the seatpost, the Sonic Wing works with most seats too. Its aluminum construction means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps. Compatible with Cervelo seatposts with two 6mm holes as well as the new QR PR6.
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Aluminum. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post
$6.99 - $7.99
Key features - All new cap and bottle design for great feel and consistent closure - 100% FDA approved biodegradable plastic - BPA and BPS free - Triple-seal cap provides leak-proof functionality - Soft thermoplastic poppet is easy to open and close - Wide mouth for easy addition of powdered drinks or ice cubes - 2 sizes available : 21oz and 26oz - Manufactured in the USA
Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.
Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.
Help is ready to spring into action when you need it and Ninja CO2+ is the ultimate quick fix! The included Micro AirBooster and 2 threaded 16g CO2 cartridges make fixing flats easy with quick access by a simple twist. Integrated tire levers make the system complete. - Cage Material: Engineering grade plastic - Presta / Schrader Push to inflate - 2 engineering grade plastic levers - Fits standard water bottle - 2 threaded 16g CO2 cartridges Compartment for CO2 inflator & cartridges - Size: 19.3 x 9.6 x 7.8 cm / 7.6” x 3.8” x 3.1” - Weight: 226 g / 7.97 oz
Ninjas adapt and conquer, and the Ninja Cage is no exception. Knowing that smaller frames and tighter spaces may not allow the use of Ninja Cage mounted add-ons, Topeak includes extra rubber pads and zip ties so you can use it in combination with the top water bottle boss to mount Ninja Cage and your weapon of choice. Choose from any of the Ninja T series tool cases, Ninja CO2 inflator or Ninja Pouch spare tube carriers for the ultimate combination. - Material: Engineering grade plastic - Cage Outer Diameter: Fits standard water bottle - Added Feature: Rubber pads and zip ties - Size: 14.8 x 8.2 x 7.8 cm / 5.8” x 3.2” x 3.1” - Weight: 44 grams
The Ninja Pouch Mountain easily mounts to your bike with most water bottle cages to match the aesthetics that best suit you. It conveniently holds a spare tube (Up to 29” x 2.35”) in an area on your frame that’s usually not splattered with mud. It keeps your tube clean and ready to use when you need it. - Material: Aluminum / Engineering grade plastic / EVA foam - Compatibility: 26” x 2.5” /27.5” x 2.5” /29” x 2.35” - Added Feature: Able to remove the pouch section to assemble w/ Ninja Cage - Size: 17 x 10 x 7 cm 6.7” x 3.9” x 2.8” - Weight: 71 grams
The perfect partner with Ninja P, the Ninja Pouch Road easily mounts to your bike with most water bottle cages to match the aesthetics that best suit you. It conveniently holds a spare tube (up to 700 x 25c) in an inconspicuous area keeping the clean lines of your bike, but ready for action when you need it most. - Material: Aluminum / Engineering grade plastic / EVA foam - Added Feature: Able to remove the pouch section to assemble w/ Ninja - Cage - Compatibility: Up to 700 x 25c inner tube - Weight: 65 grams - Size: 16 x 10.6 x 6.8 cm / 6.3” x 4.2” x 2.7”
Like its smaller sibling, the Ninja Pouch+ Mountain conveniently carries larger mountain bike tubes (up to 29” x 1.9” / 2.35”) in an area of your frame that’s usually not splattered with mud. Keeping things clean and having easy access to the integrated tire levers makes changing a tube a quick proposition. - Material: Cage-Engineering grade plastic; Bag-EVA foam - Cage Outer Diameter: Fits standard water bottle - Tire Levers: 2 engineering grade plastic levers - Compatibility: 26” x 2.5” / 27.5” x 2.5” / 29” x 2.35” inner tubes - Size: 20 x 10 x 7 cm / 7.9” x 3.9” x 2.8” - Weight: 108 grams
Keeping with the stealth ethos of the Ninja series, the Ninja Pouch+ Road conveniently holds a spare tube (up to 700 x 25c) in an inconspicuous area keeping the clean lines of your bike. Easy access to the integrated tire levers makes changing a tube a quick proposition. - Material: Cage-Engineering grade plastic; Bag-EVA foam - Cage Outer Diameter: Fits standard water bottle - Tire Levers: 2 engineering grade plastic levers - Compatibility: Up to 700 x 25c inner tube - Size: 18.5 x 10.8 x 7.8 cm / 7.3” x 4.3” x 3.1” - Weight: 101 grams - Inner tube not included
Topeak's Shuttle Cage AL is the classic aluminum cage for your bottles. It holds securely and gives you quick access to your bottles.
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. Two options are available with the Elite 90 designed especially for triathlon speci c saddles with vertical rear rails and the Elite designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included/Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Saving time wherever possible is important to a triathlete and the Tri-BackUp Pro I aids by mounting to the parallel section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Mount: Parallel rail section of saddle, Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Material: Pressed aluminum - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 12.5 x 8 x 4.8 cm / 4.9” x 3.1” x 1.9” - Weight: 97 grams
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams
Designed specifically for saddle carrier mounting, the Tri-Cage is made from an engineering grade polymer and the easy access “forward-release” design helps prevent accidental drops when reaching back for a bottle. An integrated bottom mount for Ninja T Road tool case, Ninja CO2 inflator, or Ninja Pouch Road spare tube carrier makes it easy to carry the essentials while the included tire levers round out the package. Holds bottles up to 750cc. Recommended bottle diameter 72mm - 74mm - Material: Engineering grade plastic - Mount: Topeak Tri-BackUp hydration mounts or other rear hydration mounting systems - Tire Levers: 2 engineering grade plastic levers - Cage Outer Diameter: Fits standard water bottle - Compatibility: Ninja TC Road, Ninja CO2, Ninja Pouch Road - Size: 14.7 x 9 x 8.2 cm / 5.8” x 3.5” x 3.2” - Weight: 74 grams
Sunlite's ATB Bottle Cage is made of heavier aluminum than the regular bottle cage to keep your bottle in place on bumpy rides. It's still light and looks great.
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm
- For water bottle braze-ons - Type: Cage bolt
$3.59 - $5.39
Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.
$3.79 - $4.79
- Universal alloy water bottle cage - Hardware included - Size: 6mm
• Handlebar mounted cup holder • Insulated design • No tool installation • Fits 22.2mm - 31.8mm bars
• Composite construction • Fits standard bottles
Sunlite's Handlebar Mount Bottle Cage lets you attach a water bottle to your handlebars for easy access. Its lightweight design is good for road and mountain use.
The Sunlite Side Mount Bottle Cage is perfect for full suspension bikes and smaller frames where a standard water bottle just won't fit.
$4.59 - $5.19
• Biodegradable bottle and cap • Easy to squeeze soft plastic, soft plunger • BPA free, California prop 65 compliant • Made in the U.S.A.
Page 1 of 8 Next page