Roof-Mount

Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 150cm / 60 in

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 108cm / 43 in

Premium aerodynamic load bar for an exceptionally quiet ride and easy installation of accessories. 1-pack. - Aerodynamic and quiet - Sliding functionality for easy loading - Easy to install and use Features: - Load bar for Thule Edge roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - Designed and developed for swift click-in assembly with Thule Edge load carrier feet, providing an integrated, low-profile roof rack and a custom look - Smooth installation and removal of accessories thanks to upper T-track with QuickAccess interface - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length Specifications: - Loading width: 36-40 in - Length (in): 41 - Maximum load: lb/75 kg. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 150cm / 60 in

Versatile water sport carrier that can transport either kayaks or stand-up paddle boards with one system. Features - Multiple ways to carry: Single kayak in J-style or saddle configuration, two kayaks in stacker mode and up to two SUPs in saddle mode - Maximum protection of kayaks and stand-up paddle boards thanks to the thick rubber saddles and padded upright - Easily manage load straps while strapping down the kayaks using the integrated StrapCatch (two sets of load straps with BuckleBumpers and bow and stern tie downs included) - Quickly folds down flat when not in use for better aerodynamics - Fits all rack systems with the universal mounting hardware and quick to install with no tools required - Accommodates kayaks up to 36" wide and a maximum kayak weight of 130 lbs Technical specifications - Load capacity: 130 lb - Dimensions: 32 x 7 x 19 in - Weight: 20 lb - Rubber cover for strap buckle - Length of straps: 2x15' Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar - ProBar

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in

Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch

2019 Model Mini Bomber comes standard with our Universal Huske Fork Mount upgrade, with 9mm plugs and quick release skewer. The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6-inch SeaSucker vacuum mounts, this rack has plenty of muscle. Fits on virtually any car. Minimal assembly required.

A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool

This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust-resistant steel design. Features: - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars, or factory racks (sold separately) - Primary watercraft: Kayak

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty

Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 135cm / 53 in

Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.

Ski/snowboard racks need to do one thing well: hold your stuff safely and securely. Ours does a lot more, and awesomely. Easy to install on any roof rails, handy slide-out feature to load and unload without climbing on your vehicle, and a look that says you don't cut corners (but you do like to carve on the slopes). - Metal outer shell and premium gloss metallic powdercoat provide unmatched strength and finish - GripLock rubber securely holds skis or snowboards of varying sizes - FLIP MOUNT SYSTEM allows for quick install or removal - Large intuitive handle - Both GRIP and FLIP Mount System are fully locking - Slide-out design makes for easy loading and unloading

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 135cm / 53 in

This fork mount roof rack can handle any bike. Really. That bike you’re thinking of? Yes. Featuring the 3 Way fork-mount system, the TRIO can handle any bike you own. Top that off with a slim line design, security system, and rugged good looks, and you have the most complete fork-mount rack ever designed. 3 Way Fork Mount System - 3 Way fork mount system can handle any bike you own - Fits 9, 12, 15, & 20 mm forks with size-specific adapters - Adapters included with the TRIO: 9x100, 15x100, and 15x110 - Additional adapters available Additional Details - Easy Fit: Mounts to most factory and all aftermarket cross bars (max crossbar size: 3.5” wide by 1.5” thick) - Carrying capacity: 1 Bike Capacity (45lbs max) - Aerodynamic & Low Profile - Integrated Cable Lock (locks both frame and rear wheel): Style and security all at seven pounds - Sliding rear tire strap - Weight: 7lbs

- Single rail bike rack - Roof mounted - Kashima coated struts - OneTap hydro pneumatic tire arms - Integrated cable lock - Adaptable: 18'' to 29" wheels - Car Rack Mount Type: Roof - Maximum Tire Width: 5''

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

The proven Yakima tower for cars with nothing up top, the Q Towers pair with Q Clips to turn a naked roof vehicle into a versatile pile-it-on hauling machine. Durable, simple to install, and super-secure, these work with our RoundBars to get you where you want to go. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Works with the classic Yakima RoundBar - Four-way movement delivers a more solid fit - Padded base aids grip and helps preserve your paint job - Fast and easy tool-free installation and removal - Easily locks to you vehicle with our SKS system (sold separately) Product Specs: - Weight: 3.97 lbs./Pair - Dimensions: L 5.50 in x W 2.50 in x H 5.50 in - Limited Lifetime Warranty

Yakima's Viper bike mount has a rugged die-cast head that easily accepts and securely grips almost every quick-release fork, even those with disc brakes. For super easy mounting, it includes an ergonomic long-throw quick release and a ratcheting wheel strap. Plus, the Viper's long tray works great on vehicles with short roof lines. The Viper fits on round- and square-bar racks, too.

Ski/snowboard racks need to do one thing well: hold your stuff safely and securely. Ours does a lot more, and awesomely. Easy to install on any roof rails, handy slide-out feature to load and unload without climbing on your vehicle, and a look that says you don't cut corners (but you do like to carve on the slopes). - Metal outer shell and premium gloss metallic powdercoat provide unmatched strength and finish - GripLock rubber securely holds skis or snowboards of varying sizes - FLIP MOUNT SYSTEM allows for quick install or removal - Large intuitive handle - Both GRIP and FLIP Mount System are fully locking - Slide-out design makes for easy loading and unloading

An adapter for Thule Front Wheel Holder to enable transport of bikes with 12-15mm thru-axles. - Enables transportation of wheels with 12-15 mm thru-axle forks

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.